205
Setting Options Description
HDMI Link Device Connections
HDMI Link
Audio Out Device
Power On Link
Power Off Link
Adjusts the HDMI Link options that allow
the projector or remote to control HDMI-
connected devices that support the CEC
standard
Device Connections: lists the devices
connected to the HDMI1 and HDMI2
ports when HDMI Link is enabled
HDMI Link: enables or disables the
HDMI Link feature
Audio Out Device: selects whether to
output audio from the internal speakers
or a connected audio/visual system
Power On Link: controls what happens
when you turn on the projector or a linked
device
• Bidirectional: automatically turns on
the connected device when you turn on
the projector, and vice versa
• Device -> PJ: automatically turns on
the projector when you turn on the
connected device
• PJ -> Device: automatically turns on
the connected device when you turn on
the projector
Power Off Link: controls whether linked
devices are turned off when the projector
is turned off
HDMI EQ Setting 1, 2, or 3 Adjusts the HDMI input signal level
depending on the devices connected to
the HDMI port. Change the setting if
there is a lot of interference in the image
or if no image is projected.
Reset Signal I/O Settings Resets all settings on the Signal I/O
menu to their default values
To Next Page
Loading...
