Epson PowerLite EB-L200SX - Selecting the Connected USB Source; Disconnecting a USB Device or Camera from the Projector

41
2. Connect the USB cable (or USB flash drive) to the projector's USB-A port.
Note: Use the USB cable supplied with or specified for use with your device. Do not connect a USB
hub or a USB cable longer than 10 feet (3 m), or the device may not operate correctly.
3. Connect the other end of the cable (if applicable) to your device.
Parent topic: Connecting to External USB Devices
Related tasks
Starting a PC Free Slideshow
Selecting the Connected USB Source
You can switch the projector's display to the source you connected to the USB-A port.
1. Make sure the connected USB source is turned on, if necessary.
2. Press the USB or Source Search button on the remote control.
Parent topic: Connecting to External USB Devices
Related tasks
Starting a PC Free Slideshow
Disconnecting a USB Device or Camera From the Projector
When you finish presenting with a connected USB device or camera, you must prepare to disconnect the
device from the projector.
1. If the device has a power button, turn off and unplug the device.