180
Creating a User Pattern to Display
You can transfer an image to the projector and then display it as a pattern to aid in presentations when
you use the Pattern Display feature. This transferred image is called the User Pattern.
Note: Once you save a user pattern, you cannot restore the default pattern. You cannot save an image
that is protected by HDCP.
1. Display the image you want to project as the User Pattern from a connected computer or video
source.
2. Press the Menu button, select the Management menu, and press Enter.
3. Select the User Pattern setting and press Enter.
You see a prompt asking if you want to use the displayed image as a User Pattern.
Note: When you select User Pattern, adjustments such as Keystone, E-Zoom, and Aspect are
temporarily canceled.
To Next Page
Loading...
