177
8. To exit the split screen feature, press the Split or Esc button.
Input Sources for Split Screen Projection
Split Screen Projection Restrictions
Parent topic: Adjusting Projector Features
Input Sources for Split Screen Projection
You can choose most input source combinations for split screen projection, but the following
combinations are not supported:
• Computer1, Computer2, Video
• USB, USB Display, LAN
Note: When you split the screen into four screens and select the USB and the Screen Mirroring input
source at the same time, you can only select one Screen Mirroring source.
Parent topic: Projecting Multiple Images Simultaneously
Split Screen Projection Restrictions
You cannot perform the following operations during split screen projection:
• Change settings in the projector's menu
• E-Zoom
• Switching the aspect mode (the aspect mode is set to Auto)
• Operations using the User button on the remote control, other than displaying the network information
on the projected surface
• Applying the Dynamic Contrast setting
• Displaying the network information on the projected surface by a method other than pressing the User
button
• Displaying the Screen Mirroring information bar
Image restrictions
• Even if you set No-signal screen to Logo in the Display menu, the blue screen appears when no
image signal is being input
Parent topic: Projecting Multiple Images Simultaneously
To Next Page
Loading...
