Epson PowerLite EBL630U - Page 257

257
Setting Options Description
Projector ID Off
1 through 9
Assigns an ID for the projector when
you use multiple projectors
HDMI Out Setting (PowerLite
EB-L530U/EB-L630U/EB-
L630SU/EB-L635SU/EB-
L730U/EB-L735U)
Pass Through
Off
Set to Pass Through to enable up
to four projectors connected via
HDMI cables to project a unified
image.
Number of Projectors
(PowerLite EB-L530U/EB-
L630U/EB-L630SU/EB-
L635SU/EB-L730U/EB-L735U)
2 to 4 Sets the number of projectors used
to create a unified image; this
setting is displayed only if HDMI
Out Setting is set to Pass Through
Order (PowerLite EB-
L530U/EB-L630U/EB-
L630SU/EB-L635SU/EB-
L730U/EB-L735U)
1 to 4 (when HDMI Out Setting
is set to Pass Through)
1 or 2 (when HDMI Out Setting
is set to Process Out)
Sets the projector's position in
numbered order from left to right
Tiling Layout
Location Setup
Sets the number of split screens
and the position of each image; this
setting is only displayed when the
HDMI Out Setting is set to Off.