Epson PowerLite Home Cinema 705HD Quick Setup Guide

PowerLite® Home Cinema 705HD
Quick Setup
Turn on your equipment
Before using the projector, make sure you read the safety instructions in the
User's Guide on your projector CD.
1 Turn on your video source.
2 Plug in the projector.
Connect the projector
Choose from the following connections:
Video Player
Connect up to 4 video devices and use the remote control to switch between
them.
3 Open the AN Mute slide all the way.
Component-
to-VGA
adapter
Adjust the image
Press the C) power button on the projector or remote control.
The C) power light flashes green, then stays on.
NOTE: To shut down the projector, press the C) power button twice, then
unplug it. You don't have to wait for the projector to cool down.
4
HDMI video
cable
(optional)
Component
video cable
(optional)
RCA video cable
(composite
video)
(optional)
S-Video
cable
(optional)
Audio cable
(optional)
Camera or USB Device
Connect a digital camera or other USB device to the projector's ~ Type A
(flat) USB port.
1 If you don't see an image, press the Source Search button on the
projector or the remote control to select the image source.
2 To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
Thumb drive 0
Digital camera ~ A~
~
You can use the projector's Slideshow feature to project JPEG images. See the
User's Guide on your projector CD.
3 Turn the focus ring to sharpen the image.
To reduce or enlarge the image, turn the zoom ring.
4 If your image looks like 0 or 0, you've placed the projector off to
one side of the screen at an angle. Place it directly in front of the center
of the screen, facing the screen squarely.
5 If your image looks like 0 or 0, press the U or U buttons on the
projector to correct it.
11111I111111111111111111111111111111111111111111111111I
*411761300*

Epson PowerLite Home Cinema 705HD Specifications

Display

projection system	Epson 3LCD, 3-chip optical engine
native resolution	1280 x 800 (WXGA)
aspect ratio	16:10

Light Output

white light output	2500 lumens
color light output	2500 lumens
contrast ratio	Up to 3000:1

Lamp

lamp type	200 W UHE
lamp life (eco mode)	Up to 5000 hours
lamp life (normal mode)	Up to 4000 hours

Power

power supply voltage	100 – 240 V ±10%, 50/60 Hz
power consumption	244 W, 3 W standby
operating temperature	41 ˚ to 95 ˚F (5 ˚ to 35 ˚C)

Projection Lens

f-number	1.58 – 1.72
focal length	16.9 mm – 20.28 mm
zoom ratio	Optical zoom 1.0 – 1.2

Weight and Dimensions

projector dimensions (including feet)	11.6" x 9.0" x 3.1" (W x D x H)
projector dimensions (excluding feet)	11.6" x 9.0" x 3.0" (W x D x H)
projector weight	11.50 lb