Epson PowerLite L400U - Available Test Pattern Image Adjustments; Adjusting the Image Height

114
3. Press the left or right arrow button on the remote control or press Enter on the control panel to cycle
through the available test patterns.
4. Adjust the image as necessary.
5. Press the Esc to clear the test pattern.
Available Test Pattern Image Adjustments
Parent topic: Using Basic Projector Features
Related tasks
Setting the Screen Type
Available Test Pattern Image Adjustments
You can adjust the following settings while the test pattern is displayed.
Menu Settings
Image Color Mode
White Balance
Advanced
• Gamma
1
• RGBCMY
Settings Geometry Correction
Extended Multi-Projection
2
1
Except for custom Gamma settings
2
Except for the Color Uniformity setting
Parent topic: Displaying a Test Pattern
Adjusting the Image Height
If you are projecting from a table or other flat surface, and the image is too high or low, you can adjust
the image height using the projector's adjustable feet.
1. Turn on the projector and display an image.