Solving Problems 147
Checking Projector Status
If your projector isn’t working correctly, first turn it off and unplug it.
Then plug the power cord back in and turn on the projector. If this
doesn’t solve the problem, check the lights on top of the projector.
What To Do When the Lights Flash
The lights on top of the projector indicate the projector’s status.
Refer to the following table for a complete description of the
projector’s status lights:
Temperature light
Lamp light
Power light
Wireless LAN status light
Status lights
Light Status Description
Orange The projector is in sleep or standby mode. You can unplug it or press
the
P power button to turn it on.
Flashing green The projector is warming up. Wait for the image to appear.
Green The projector is operating normally.
To Next Page
Loading...
