Projector Installation 165
■ Lens theft deterrent screw. You can lock the lens with the
supplied screw, so that the lens cannot be removed.
In addition, the projector includes several menu-operated security
features. See page 121.
Installing and Removing the Cable
Cover
Install the rear cable cover to enhance the appearance of the projector
and prevent any cables from being loosened or removed. To install the
cover, follow these steps:
1. Insert its tabs into the slots as shown, then push the cover against
the projector.
note
These illustrations show the
projector mounted on the
ceiling.
To Next Page
Loading...
