Setting Up the Projector 31
Connecting to the DVI-D Port
(G5450WUNL/G5750WUNL only)
1. Locate a DVI-D cable.
2. Connect the cable to the DVI-D connector on your computer
and the
DVI-D connector on the projector.
3. If you want to play sound through the projector, see page 46 for
instructions on connecting audio cables. With the optional
wireless mouse receiver (see page 70), you can use the remote
control as a mouse.
4. When you’ve finished making any connections, see page 51 for
instructions on turning on the projector and Chapter 2 for
instructions on displaying and adjusting the image.
To Next Page
Loading...
