38 Setting Up the Projector
Connecting a DVI-D Video Source to the DVI-D
Port (G5450WUNL/G5750WUNL only)
1. Locate a DVI-D cable.
2. Connect the cable to the DVI-D connector on your player and
the
DVI-D connector on the projector.
3. If you want to play sound through the projector, see page 46 for
instructions on connecting audio cables.
4. When you’ve finished making any connections, see page 51 for
instructions on turning on the projector and Chapter 2 for
instructions on displaying and adjusting the image.
To Next Page
Loading...
