Displaying and Adjusting the Image 57
Adjusting the Position of the Image
You can use the vertical lens shift dial on the top of the projector to
move your image up or down, or you can use the horizontal lens shift
dial to move your image left or right.
Additionally, if the projector is on a table, you can use the projector’s
adjustable feet to adjust the image:
1. Stand behind the projector. Press the foot release lever up and lift
the front of the projector.
2. Once the image is positioned where you want it, release the lever
to lock the foot in position.
Vertical Horizontal
note
Raising the projector with
the front adjustable foot
causes the image shape to
distort or “keystone,” but
you can correct the shape as
described on page 58.
To Next Page
Loading...
