Epson PowerLite Pro G5550 - Installing the Optional Wireless 802.11 G;B;A Module

78 Using the Projector on a Network
Installing the Optional Wireless
802.11g/b/a Module
Make sure you have the optional Wireless 802.11g/b/a Module. Turn
off the projector and disconnect the power cord before you install the
module.
1. Remove the cover from the wireless module’s insertion area.
2. Insert the Wireless 802.11g/b/a Module as shown.
3. Fasten the module using the screw that came with it.
Insert
screw here