Epson PowerLite Pro G5650W - Projecting Files Created with PowerPoint; Playing a Scenario

Projecting Files Created with PowerPoint
11
Projecting Files Created with PowerPoint
To project a PowerPoint file with PC Free, convert it to a FSE or SIT file
by using the supplied EasyMP Slide Converter application software. See
the EasyMP Slide Converter Operation Guide for details.
In this Guide converted files are known as scenarios.
This section describes the method for playing scenarios stored in a USB
storage device, and the operations during scenario playback.
Playing a Scenario
Procedure
A Start PC Free. s p.7
The file list screen is displayed.
B Press the [h] button on the remote control or [w/],
[v/ ], [</ ] and [>/ ] buttons on the control panel to
position the cursor on the target scenario.
C Press the Enter button.
Starts playback.
Operations While Playing Back Scenarios
The following operations are possible using the remote control while
playing a scenario.
To end playing back a scenario, press the Esc button. On the screen that
is displayed, select Exit, and then press the Enter button.
1 Displays the previous slide for an FSE file.
2 Displays the next slide for an FSE file.
3 Displays the next object or slide.
4 Displays the previous slide.
5 Displays the next slide.
6 Displays the next object or slide.
7 Displays the previous object or slide.