Other functions
18
Other functions
Basic Scenario (SIT file) Editing
For SIT files converted via Perform simplified conversion on EasyMP
Slide Converter, it is possible to change the order in which images are
projected, and set whether or not to display individual images.
q
Basic editing cannot be performed for FSE files.
Procedure
A Press the [h] button on the remote control or [w/],
[v/ ], [</ ] and [>/ ] buttons on the control panel to
position the cursor over the SIT file you want to edit, and
then press Esc button.
B Select "Edit Scenario" from the menu displayed, then press
the Enter button.
C Position the cursor on the desired slide, and then press the
Esc button.
The sub menu is displayed.
Select Move Files to change the order of the slides, and Show/Hide
to show or to hide files, then press the Enter button.
Go to step 4 when you select Move Files.
Go to step 5 when you select Show/Hide.
To Next Page
Loading...
