Connecting to a Projector on a Different Subnet
36
B Enter the IP address or the projector name for the projector
you want to connect to, and click "OK".
The search results are displayed on the EasyMP Network Projec-
tion projector selection screen.
Provided the target projector has been identified, select that projec-
tor, and then click Connect to establish a connection.
When you will always be using that projector, save the search as a
Profile, so that you do not have to specify the relevant details every
time you perform a search.
Performing a Search with a Profile
You can save a search for a frequently used projector as a Profile. A
"Profile" is a file containing all of the information pertaining to a given
projector, such as the projector name, its IP address, and SSID. If you
specify that information from the next time you perform a search, there
will be no need to specify the IP address or projector name each time you
perform a search. For example, by creating a group of Profiles for each
place where a projector is setup and managing them with folders, the
target projector can be found quickly.
This section explains how to create and edit a Profile.
A
Building A
E
Floor 1
B
Building B
F
Floor 2
C
Building C
G
Floor 3
D
Building D
To Next Page
Loading...
