Epson PowerLite Pro G6070W - Using the Projector Help Displays

Power light Lamp Temp light Filter light Status and solution
light
Flashing orange Flashing Flashing Off When transferring settings between
rapidly orange orange rapidly projectors, writing may have failed and a
rapidly projector error may have occurred. Turn the
projector off, unplug it, and contact Epson
for help.
Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and
contact Epson for help.
Parent topic: Solving Problems
Related references
Projector Setup Settings - Extended Menu
Where to Get Help
Related tasks
Cleaning the Air Filter
Replacing the Air Filter
Replacing the Lamp
Using the Projector Help Displays
You can display information to help you solve common problems using the projector's Help system.
1. Turn on the projector.
2. Press the Help button on the remote control.
You see the Help menu.
3. Use the up and down arrow buttons to highlight the problem you want to solve.
4. Press Enter to view the solutions.
5. When you are finished, do one of the following:
• To select another problem to solve, press Esc.
• To exit the help system, press Help.
Parent topic: Solving Problems
217