Searching by Specifying the IP Address and Projector name (For Advanced Connection Mode only)
36
Searching by Specifying the IP Address and Projector name (For Advanced Connection Mode only)
In the following explanations, unless otherwise noted, Windows screen
shots are used.
You see a similar screen even when using Macintosh.
Procedure
A Click "Manual search" on the EasyMP Network Projection
projector selection screen.
B Enter the IP address or the Projector name for the projector
you want to connect to, and click "OK".
The search results are displayed on the EasyMP Network Projec-
tion projector selection screen.
Provided the target projector has been identified, select that projec-
tor, and then click Connect to establish a connection.
When you will always be using that projector, save the search as a
Profile, so that you do not have to specify the relevant details every
time you perform a search. s p.37
To Next Page
Loading...
