Management Using SNMP
134
Management Using SNMP
By setting SNMP from the projector's configuration menu, notification
messages are sent to preset e-mail addresses when a problem or warning
occurs with a projector. This is useful when controlling projectors
centrally at a point distant from them. s p.87
q
• SNMP should be managed by a network administrator or someone who is
familiar with the network.
• To use the SNMP function to monitor the projector, you need to install the
SNMP manager program on your computer.
• The managing function using SNMP cannot be used via wireless LAN in
Quick mode.
• Up to two destination IP addresses can be saved.
To Next Page
Loading...
