Adjusting the Projected Image
162
*1 PowerLite Pro Z8150NL/Z8250NL/Z8255NL: V x 56%
*2 PowerLite Pro Z8150NL/Z8250NL/Z8255NL: H x 6%
The position of the projected image cannot be moved to both the
horizontal and vertical maximum value.
Example: When the image is moved to the maximum value horizontally,
the image can be moved up to 50% vertically. When the image is moved
to the maximum value vertically, the image cannot be moved
horizontally.
Focusing the Image
Procedure
A Press the [Focus] button on the remote control or press the
[Lens] button on the back of the projector until "Adjust
Focus" is displayed on the screen.
B To adjust the focus, use the [h] button on the remote control
or the arrow buttons on the back of the projector as shown
below.
C When you’re done, press the [Esc] button on the remote
control or on the back of the projector.
Zooming the Image
Procedure
A Press the [Zoom] button on the remote control or press the
[Lens] button on the back of the projector until "Adjust
Zoom" is displayed on the screen.
A
Center of lens
B
Projected image when lens shift is set in the center
To Next Page
Loading...
