Epson PowerLite Pro Z8150NL - Page 181

Settings for Multiple Projectors
181
Procedure
A Press the [Menu] button and select Extended menu -
"Multi-Projection" from the configuration menu. s "Using
the Configuration Menu" p.55
B Select "Edge Blending", and then press the [Enter] button.
C Turn on "Edge Blending".
D Displays the guide.
q
If the guide is not clear, you can change the color of the guide using the
Guide Colors setting.
E Set a side for edge blending.
Guide Colors You can select from three guide colors.
Remote Control
Sub Menu Function
(1) Select Edge Blending, and then press the [Enter] button.
(2) Select On, and then press the [Enter] button.
(3) Press the [Esc] button.
(1) Select the Guide Display, and then press the [Enter] button.
(2) Select On, and then press the [Enter] button.
(3) Press the [Esc] button.
(1) Select an edge (Top Edge, Bottom Edge, Right Edge, or Left
Edge), and then press the [Enter] button.
(2) Select Blending, and then press the [Enter] button.
(3) Select On, and then press the [Enter] button.
(4) Press the [Esc] button.