Epson PowerLite Pro Z8150NL - Changing the Aspect Mode; (Powerlite Pro Z8450 WUNL;Z8455 WUNL); Input Port

Changing the Aspect Ratio of the Projected Image
28
Procedure
The aspect mode name is displayed on the screen by pressing the
[Aspect] button.
If you press the button while the aspect mode name is displayed on the
screen, it changes to the next aspect mode.
q
• The aspect mode can also be set using Aspect in the Signal menu from the
configuration menu. s p.62
• When Scale on the Signal menu is set to On and Scale Mode is set to Full
Display, you cannot change the aspect mode.
Changing the Aspect Mode
(PowerLite Pro Z8450WUNL/Z8455WUNL)
Projecting images from video equipment or from the
HDMI1/2 or SDI input port
Each time the [Aspect] button on the remote control is pressed, the
aspect mode changes in the order Auto (Normal when projecting from
the SDI input port), 16:9, 16:9 (Up), 16:9 (Down), Full, Zoom, and
Native. s p.27
Remote Control
Example: 720p signal input (resolution: 1280x720, aspect ratio: 16:9)
A
Auto/Normal
B
16:9
C
16:9 (Up)
D
16:9 (Down)
E
Full
F
Zoom
G
Native