Part Names and Functions
18
Control Panel
Name Function
1
[t] button Turns the projector power On or Off.
2
[Lens] button Press this button to cycle through the focus, zoom,
and lens shift settings to adjust the lens.
3
[Source Search]
button
Changes to the next input source that is
connected to the projector and is sending an
image. s p.25
4
[Enter] button If pressed during projection of computer analog
RGB signals, it automatically adjusts the Tracking,
Sync., and Position to project the optimum image.
When the configuration menu or a Help screen is
displayed, it accepts and enters the current
selection and moves to the next level. s p.55
5
[w/][v/]
button
Corrects vertical keystone distortion. s p.164
If pressed while the configuration menu or a Help
screen is displayed, these buttons only have the
[ ] and [ ] functions which select menu items
and setting values. s p.55
When projecting using "Connect to a Network
Projector", these buttons function only as [ ] and
[ ] buttons.
6
[Shutter] button Closes or opens the electric shutter, or mutes the
image temporarily to dim the screen.
Any operation that is selected after using the
[Shutter] button, is still executed.
s p.39
7
[Esc] button Stops the current function.
If pressed when the configuration menu is
displayed, it moves to the previous menu level.
s p.55
8
[</][>/] button Corrects horizontal keystone distortion. s p.164
If pressed while the configuration menu or a Help
screen is displayed, these buttons only have the
[ ] and [ ] functions which select menu items
and setting values. s p.55
When projecting using "Connect to a Network
Projector", these buttons function only as [ ] and
[] buttons.
9
[Menu] button Displays and closes the configuration menu.
s p.55
Name Function
To Next Page
Loading...
