16. Adjust the linearity by doing the following as necessary:
• Press and hold the left arrow button to contract the distance between the lines closest to the left or
top of the image.
• Press and hold the right arrow button to contract the distance between the lines closest to the right
or bottom of the image.
17. When you are finished, press Menu.
Note: If necessary, you can fine-tune the results of your Corner Wall adjustments using Point Correction.
Parent topic: Image Shape
Related references
Projector Feature Settings - Settings Menu
Related tasks
Displaying a Test Pattern
Correcting Image Shape with Point Correction
Resizing the Image with the Zoom Button
1. Turn on the projector and display an image.
102
To Next Page
Loading...
