4. Press and hold the arrow buttons to focus the image around the center of the lens.
5. Rotate the distortion ring until the area around the edges of the image is also focused.
6. Press the Focus button again, then press the arrow buttons to focus the entire screen image.
7. If the image area shown in step 4 is out of focus, rotate the distortion ring to bring the area into focus.
Parent topic: Focusing the Image Using the Focus Button
Related tasks
Adjusting the Image Position Using Lens Shift
Remote Control Operation
The remote control lets you control the projector from almost anywhere in the room, up to 98 feet (30 m)
away. You can point it at the front or back of the projector.
105
To Next Page
Loading...
