cm) diagonally and the projection surface should not be colored or textured; otherwise the adjustment
grids are difficult to align.
1. Press the Menu button.
2. Select the Extended menu and press Enter.
3. Select the Display setting and press Enter.
4. Select the Panel Alignment setting and press Enter.
5. Press Enter and select On.
6. Press Esc.
7. Select the Select Color setting and choose one of the following:
• R to adjust the red color convergence
• B to adjust the blue color convergence
Note: You can adjust only the red or blue color convergence; you cannot adjust the standard green
color panel.
8. Select the Pattern Color setting and press Enter.
9. Select the pattern you want to use and press Esc.
133
To Next Page
Loading...
