Status Description
Lamp2 Failure (S) A Lamp 2 failure occurred
S: indicates a standard lamp
Lamp2 Failure (P)
P: indicates a Portrait mode lamp
Power1 Error A power error occurred
Power2 Error
Internal Error An internal error occurred
Cinema Filter Err A cinema filter error occurred
Auto Iris Error An auto iris error occurred
Airflow Error A filter airflow error occurred
Shutter Error A shutter error occurred
Pump Error A system cooling error occurred
Temp Warning A high temperature warning occurred
Internal Warning A warning regarding the internal system occurred
Airflow Decline A low airflow error occurred
Lamp1 Warning (S) A lamp warning occurred in the indicated
Standard or Portrait mode Lamp 1 or Lamp 2
Lamp1 Warning (P)
Lamp2 Warning (S)
Lamp2 Warning (P)
Power1 Warning A power warning occurred
Power2 Warning
Shutter Warning A shutter warning occurred
Direction Warning The usage angle is out of range. Check the lamp
type and set it at the correct angle
Lamp Mismatch A lamp type mismatch occurred; use the same
type of lamp (Standard or Portrait mode) for both
Lamp 1 and Lamp 2
Clean Filter An air filter notice occurred; clean the air filter
212
To Next Page
Loading...
