Epson PowerLite W16SK - Part Names and Functions

5
Part Names and Functions (Front/Top)
When two projectors are assembled in a stacked conguration, the projector on top is called the “Commander”, and the projector on the bottom is called the
“Receiver.” When suspended from a ceiling, the projector on top is the receiver, and the projector on the bottom is the commander.
The commander controls the receiver, and the projectors are linked together (with the included USB cable). You can operate both projectors at the same time
from the commander’s control panel.
1
A/V mute slide
4
Zoom ring
7
Stacking mount angle adjustment
10
Control panel
2
Polarizing lter
5
Remote receiver
8
Stacking mount connector
3
Focus ring
6
Sensor
9
Indicators
Control panel
Commander
Receiver