Replacing the Lamp
Resetting the Lamp Timer
Parent topic: Projector Maintenance
Related references
Projector Information Display - Info Menu
Optional Equipment and Replacement Parts
Projector Lamp Specifications
Replacing the Lamp
Before you replace the lamp, let the product cool down for at least one hour so the lamp will not be hot.
Warning: Let the lamp fully cool before replacing it to avoid injury.
You can replace the lamp while the product is mounted to the ceiling, if necessary.
Note: The illustrations in this section show how to replace the commander projector's lamp, but you can
replace the receiver projector's lamp using the same steps.
1. Turn off the product and unplug the power cords.
2. Allow the projector lamp to cool down for at least one hour.
99
To Next Page
Loading...
