20
Restrictions
❏ Pausing a job cannot be made by the cooperative application. Use EPSON Total Disc Monitor to interrupt
the job.
❏ While a job is processed, another job cannot interrupt the ongoing job, and publishing discs directly from
EPSON Total Disc Maker cannot be made.
❏ Status of progress of writing or printing cannot be obtained. A writing complete status also cannot be
obtained when both writing data and printing label jobs are performed.
❏ TD Bridge does not have a function to obtain job and error logs. Include the function in your cooperative
application if necessary.
❏ Create the JDF file, JCF file, file list file, and text item file in ANSI text format. Other than ANSI such as
Unicode, UTF-8 cannot be used.
❏ The supported versions of EPSON Total Disc Maker and TD Bridge are as follows.
●: Supported, ▲: Not supported
❏ PIN Controlled Mode and Security Mode for PP-100N is not supported.
❏ TD Bridge cannot be started while EPSON Total Disc Maker is running.
TD Bridge
1.0 1.0 2.0 2.0 3.0 3.0 4.0 5.0 5.0 6.0
Epson Total
Disc Maker
1.0 ● ▲▲▲▲▲▲▲▲▲
1.0 ▲● ▲▲▲▲▲▲▲▲
2.0 ▲▲● ▲▲▲▲▲▲▲
2.0 ▲▲▲● ▲▲▲▲▲▲
3.0 ▲▲▲▲● ▲▲▲▲▲
3.0 ▲▲▲▲▲● ▲▲▲▲
4.0 ▲▲▲▲▲▲● ▲▲▲
5.0 ▲▲▲▲▲▲▲● ● ▲
5.0 ▲▲▲▲▲▲▲▲● ▲
6.0 ▲▲▲▲▲▲▲▲▲●
To Next Page
Loading...
