Epson PP-100II - Page 27

27
Chapter 3 Setting
3
❏ Model-specific Settings (General)
❏ Model-specific Settings (PP-100AP)
Setting Item Explanation
Print Setting Print Mode Setting Select the print quality from the following two options; “Quality” (for the best
print quality) and “Speed” (for the highest print speed).
If specified in both job description files and the environment settings screen, the
setting of job description files is prioritized.
Setting Item Explanation
Print Setting Print Mode Setting This sets the print quality. To give priority to print quality, specify “1”. To give
priority to printing speed, specify “2” or “3” (specify “3” for the fastest printing
speed).
If specified in both job description files and the environment settings screen, the
setting of job description files is prioritized.
Default input stacker to use in External
Output Mode
This sets the input stacker that is normally used in External Output Mode. Specify
“Stacker 1” for Stacker 1, “Stacker 2” for Stacker 2, or “Auto” for both stackers.