Epson PP-100II - Page 46

46
CLOSE_DIS
C
Specify whether to
close (finalize) the
burnt disc.
Specify "YES" when closing the disc after
burning.
Specify "NO" when not closing the disc after
burning.
If not specified, the disc will be closed. This
setting cannot be applied to DVD+R DL and
DVD-R DL (ignored when any of the disc types
has been selected).
Three
characters
"YES" or "NO" Arbitrary ● --
FORMAT
(*1)
Specify a disc format
when creating a
data disc.
[When the disc type is CD]
Specify "ISO9660L2" when creating the
CD in ISO9660 Level 2 format.
Specify "JOLIET" when creating the CD in
Joliet format.
Specify "UDF102" when creating the CD
in UDF1.0.2 format.
When not specified, the CD is burnt in
ISO9660 Level 2 format.
[When the disc type is DVD]
Specify "UDF102" when creating the DVD
in UDF1.0.2 format.
Specify "UDF150" when creating the CD
in UDF1.5.0 format.
Specify "UDF102_BRIDGE" when creating
the DVD in UDF1.0.2 + UDF Bridge
format.
When not specified, the DVD is burnt in
UDF1.0.2 + UDF Bridge format.
[When the disc type is BD]
Specify "UDF102" when creating the BD
in UDF1.0.2 format.
Specify "UDF260" when creating the BD
in UDF2.60 format.
When not specified, the BD is burnt in
UDF 2.60 format.
13 characters Any of
"ISO9660L2",
"JOLIET",
"UDF102",
"UDF150",
"UDF102_BRIDGE
",
"UDF260"
Arbitrary ● --
DATA
(*1)
Specify folders and
files to be written to
the data disc.
When creating data discs, specify the
directory path to the source file and that to
the destination.
The directory path to the source file must be
the path from the computer on which TD
Bridge installed.
(For explanation on the directory path to the
destination, see "Creating Data Discs -
Specifying write data file/folder".)
511 characters See "Recording
Formats and
Restrictions" on
page 4-50 for the
details.
Arbitrary ● --
DATA_LIST
(*1)
When specifying
write data using a
file list, specify the
directory path to the
file list file.
The directory path must be the path from the
computer on which TD Bridge is installed.
(For explanation on the directory path to a
source file specified in the file list file, see
"Creating Data Discs - Specifying write data
file/folder".)
255 characters Characters valid
as a directory
path
Arbitrary ● --
VOLUME_L
ABEL
(*1)
Specify a Volume
Label of the data
disc.
Specify a Volume Label to set the volume
label to the data disc.
*4 *4 Arbitrary ● --
VIDEO
(*2)
When burning Video
CDs, specify the
directory path to the
video file to be set as
video track.
When burning DVD-
Video, specify the
directory path to the
VIDEO_TS folder.
The directory path must be the Video file path
or the VIDEO_TS folder path from the
computer on which TD Bridge is installed.
When burning Video CDs, specify "CD" for
"DISC_TYPE," and when burning DVD-Video,
specify "DVD" or "DVD-DL" for it.
When "DATA" or "DATA_LIST" has been
specified, this setting becomes invalid.
(ignored if the setting is made)
255 characters Characters valid
as a directory
path
Arbitrary ● --
VIDEO_TITL
E
(*2)
Specify a video title
to configure the
video title for a
Video-CD or a DVD-
Video.
Specify a character string for the video title of
the Video-CD or the DVD-Video.
When "DATA" or "DATA_LIST" has been
specified, this setting becomes invalid.
(ignored if the setting is made)
32 characters Video-CD:
English one-byte
uppercases, one
byte numerical
characters, "_"
DVD-Video:
One-byte
numerical
characters, "_"
Arbitrary ● --
Key
name
Explanation How to specify the setting
Maximum
characters
Available
characters
(strings)
Necessary/
Arbitrary
Except PP-
100AP, Key
available
Yes/No
PP-100AP
Key
available
Yes/No