79
Chapter 4 Development Guide for a Cooperative Application
4
PUBLISHER[N] PRINTABLE_COPIES The minimum number that the device
can print is output.
When the number of printable pages is
1000 or more, "1000" is output.
When the number of printable pages is 0,
"0" is output.
When the number of printable pages is
unknown, "-1" is output.
If no jobs that include printing have been
published since the device was started, "-
1" is output.
When ink is con-
sumed
MAINTENANCE_BOX_
FREE_SPACE
The free space of the maintenance box of
the device is output.
"0" to "100" is output.
If unknown, "-1" is output.
When the remain-
ing space of the
maintenance box is
changed
DRIVE1_STATUS An ID indicating the status of drive 1 of
the device is output.
Standby: "1"
Writing: "2"
Verifying write: "3"
Unused: "4"
Error: "5"
Transferring: "6"
Stopping: "7"
Processing Plug-in: "8"
Unknown: "-1"
When the drive 1
status is changed
DRIVE1_PLUG_IN The plug-in name when drive 1 of the
device is in use. *
6
(Jobs with the error rate measurement
setting only are not written.)
Plug-in name When using Plug-In
at drive 1
DRIVE1_LIFE The life (%) of drive 1 of the device is
output.
"0" to "100" is output.
If unknown, "-1" is output.
If you are using the PP-100N and the
server system software is Ver 1.01 or
earlier, "-1" is output.
When the drive 1
life is changed
DRIVE2_STATUS An ID indicating the status of drive 2 of
the device is output.
Standby: "1"
Writing: "2"
Verifying write: "3"
Unused: "4"
Error: "5"
Transferring: "6"
Stopping: "7"
Processing Plug-in: "8"
Unknown: "-1"
When the drive 2
status is changed
DRIVE2_PLUG_IN The plug-in name when drive 2 of the
device is in use. *
6
Plug-in name When using Plug-In
at drive 2
DRIVE2_LIFE The life (%) of drive 2 of the device is
output.
"0" to "100" is output.
If unknown, "-1" is output.
If you are using the PP-100N and the
server system software is Ver 1.01 or
earlier, "-1" is output.
When the drive 2
life is changed
MODE An ID indicating the mode of the device is
output.
Standard Mode: "1"
External Output mode: "2"
Batch mode: "3"
Error Rate Measurement Mode: "4"
Read back mode: "5"
Unknown: "-1"
When the mode of
the device is
changed
SERIAL_NUMBER The serial number of the device is output. Serial number Always appears as
long as registered
machine exists
Section name Key name Explanation
Output values that indicate
status
Change
timing
To Next Page
Loading...
