41
Connecting to an External Computer Monitor
If you connected a computer to the projector's Computer In port, or a video source to one of the
projector's SDI In ports on the SDI interface board, you can also connect an external monitor to the
projector. This lets you see your presentation on the external monitor even when the projected image is
not visible.
1. Make sure your computer or video source is connected to the projector's Computer In or an SDI In
port on the SDI interface board.
2. Connect the external monitor's cable to your projector's Computer Out port (for computer sources)
or the SDI Out port that corresponds to the SDI In port you are using (for SDI sources).
Parent topic: Projector Connections
Attaching and Removing a Lens
Follow the instructions in these sections to attach or remove a compatible lens.
Attaching a Lens
Removing a Lens
Parent topic: Setting Up the Projector
To Next Page
Loading...
