Epson Pro L12000QNL - Registering a Digital Certificate on the Projector

91
Channel/Function Operation Parameters Description
12 Geometry
correction
Off 0 to 15 Performs geometry
correction (default is
255)
H/V-Keystone 16 to 31
Quick Corner 32 to 47
Point Correction 48 to 63
Curved Surface 64 to 79
Corner Wall 80 to 95
Load geometry correction
memory 1
96 to 111 Loads a geometry
correction memory
(default is 255)
Load geometry correction
memory 2
112 to 127
Load geometry correction
memory 3
128 to 143
Non-operational 144 to 175
13 Lock Cannot control
Can control
0 to 127
128 to 255
Enables/disables Art-
Net operations
(default is 0)
14 Freeze Non-operational 0 to 31, 96 to 159, 224 to
255
Pauses or resumes
image display
(default is 128)
Freeze off 32 to 95
Freeze on 160 to 223
* The slot number of the interface board followed by the port number from left to right on the interface
board
Parent topic: Using the Projector on a Network
Related tasks
Selecting Other Network Settings
Registering a Digital Certificate on the Projector
Follow the instructions here if you need to install a digital certificate on the projector to provide security
for your presentation files.