Epson PRO L1490U - Adjusting the Image Height

108
Menu Settings
Settings Geometry Correction
Brightness Settings
Extended Display
2
Color Calibration
Multi-Projection
3
1
Except for custom Gamma settings
2
Except for the Screen, Panel Alignment, and Color Uniformity settings
3
Except for the Black Level, Scale, Color Uniformity, and Color Adjustment settings
Parent topic: Displaying a Test Pattern
Adjusting the Image Height
If you are projecting from a table or other flat surface, and the image is too high or low, you can adjust
the image height using the projector's adjustable feet.
1. Turn on the projector and display an image.
2. To adjust the image height, rotate the front foot to extend or retract it.