254
On/Standby
(power) light
Status
light
Laser
light
Temp light Filter
light
Status and solution
Varies Varies Varies Varies Flashing
orange
A message to clean or replace the air
filter is displayed; turn the projector
off, unplug it, and clean or replace
the air filter as necessary
Varies Varies Flashing
orange
Varies Varies The projector is unable to maintain
constant brightness and the
Constant Brightness setting in the
Settings menu is disabled
Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and
contact Epson for help.
Parent topic: Solving Problems
Related concepts
Air Filter and Vent Maintenance
Related references
Projector Setup Settings - Extended Menu
Optional Equipment and Replacement Parts
Related tasks
Stopping Video Action Temporarily
Viewing the Status Display
You can monitor the projector's status and view error information from the status display.
1. Turn on the projector.
2. Press the i button on the remote control or the right arrow button on the control panel.
To Next Page
Loading...
