104
1 Center of lens
2 Projected image when lens shift is set to the home position
3 Maximum range: V × 55%; maximum range when performing screen matching or color
calibration: V × 45% (ELPLU04)
Maximum range when the lens is shifted horizontally all the way: V × 32%
Pro L1715SNL - ELPLX02 lens
1 Center of lens
2 Projected image when lens shift is set to the home position
3 Maximum range: V × 5%
Note: You cannot move the image upward when the lens is shifted horizontally all the way.
3. When you are finished, press the Esc button on the control panel or remote control.
Note: When adjusting the image height, position the image lower than where you want it to be and then
move it up. This will help prevent the image from moving down after adjustment. The image is clearest
when the lens is at the home position. To move the lens to the home position, press and hold the Lens
Shift button on the remote control or the Lens button on the control panel for at least three seconds.
Parent topic: Using Basic Projector Features
To Next Page
Loading...
