146
2. To turn the picture and sound back on, press the A/V Mute button again.
Note: To fade the image in and out when you use A/V Mute, turn on the Fade-out and/or Fade-in
settings in the Extended menu.
Note: If you selected A/V Mute as the A/V Mute Release setting in the Extended menu, you can still
control the projector while A/V Mute is enabled.
Parent topic: Adjusting Projector Features
Related references
Projector Setup Settings - Extended Menu
Stopping Video Action Temporarily
You can temporarily stop the action in a video or computer presentation and keep the current image on
the screen. Any sound or video action continues to run, however, so you cannot resume projection at the
point that you stopped it.
1. Press the Freeze button on the remote control to stop the video action.
2. To restart the video action in progress, press Freeze again.
Parent topic: Adjusting Projector Features
To Next Page
Loading...
