165
3. Select the Image Preset Mode setting and press Enter.
4. Select one of the presets.
5. Fine-tune each setting individually and press Enter.
Note: If you select a previously used preset, your new adjustments overwrite the old ones.
6. Press Menu or Esc to exit the menus.
Parent topic: Using Advanced Image Adjustment Features
Related references
Image Quality Settings - Image Menu
Using MPEG Noise Reduction
If you are projecting MPEG movies, you can reduce dots and block noise using the MPEG Noise
Reduction setting.
You cannot use this feature in any of the following conditions:
• The image signal exceeds WUXGA
• You turned on the 4K Enhancement setting
• You turned off the Image Preset Mode setting
1. Press the Menu button.
To Next Page
Loading...
