250
On/Standby
(power) light
Status
light
Laser
light
Temp light Filter
light
Status and solution
Off Flashing
blue
Orange Off Off Laser has a problem; turn off the
projector, unplug it from the electrical
outlet, and contact Epson for help
Varies Varies Varies Varies Flashing
orange
It is time to clean the air filter
Off Flashing
blue
Off Off Orange Low air flow through the projector
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects
• Clean or replace the air filter
• If the problem persists, unplug the
projector and contact Epson for
help
Flashing blue Varies Varies Varies Orange Low air flow through the air filter
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects
• Clean or replace the air filter
• If the problem persists, unplug the
projector and contact Epson for
help
Off Flashing
blue
Off Flashing
orange
Off A fan or sensor has a problem; turn
the projector off, unplug it, and
contact Epson for help
Flashing blue Varies Flashing
orange
Varies Varies Laser has a problem; turn the
projector off, unplug it, and contact
Epson for help
Flashing blue Varies Flashing
orange
Varies Varies An unsupported lens is attached;
make sure your lens is supported
To Next Page
Loading...
