75
2 Select OSD Control Pad to change the projector's menu settings.
3 Select Test Pattern to display a test pattern
4 Select Remote Camera Access to take an image capture of the displayed image from a
remote location
5 Select Advanced to open the advanced menu screen.
6 Select Status Information to view the projector's status.
7 Select Lens Control to adjust the lens (focus, zoom, and lens shift).
4. Select the option corresponding to the projector function you want to control.
Web Control Options
Viewing an Image Capture of the Displayed Image from a Remote Location
Parent topic: Using the Projector on a Network
Related references
Projector Setup Settings - Extended Menu
To Next Page
Loading...
