108
1 Center of lens
2 Projected image when lens shift is set to the home position
3 Maximum motion range: V × 60%
ELPLX02/ELPLX02W
1 Center of lens
2 Projected image when lens shift is set to the home position
3 Maximum motion range: Up V × 20%, Down V × 5%
Note: You cannot move the image vertically when the lens is shifted horizontally all the way.
4. When you are finished, press the Esc button on the control panel or remote control.
Note: The image is clearest when the lens is at the home position. To move the lens to the home
position, press and hold the Lens Shift button on the remote control or control panel for at least three
seconds. Set the A/V Output setting in the Extended menu to Always On so you can move the lens to
the home position even when the projector is in standby mode.
Parent topic: Using Basic Projector Features
Related references
Projector Setup Settings - Extended Menu
To Next Page
Loading...
