254
1. Turn on the projector.
2. Press the light button on the control panel.
3. Press the left or right arrow button to view different categories of information.
• Status Information: the projector's operating status
• Source: input signal information
• Signal Information: input digital signal information
• Network Wired: wired LAN settings
• Network Wireless: wireless LAN settings
• Maintenance: operating time for the projector and light source
• Version: projector's firmware version
• Setting: lets you adjust the LCD screen contrast and the length of time the screen remains lit
when you press the light button
4. Press the up or down arrow button to scroll through the information on the screen.
To Next Page
Loading...
