Epson Pro L20000UNL - Typical Setup Configurations (U.S. Only)

296
incorporated in the fixed wiring. Additionally, the projection light can be turned off by pressing the
Shutter button on the projector's control panel or remote control.
Parent topic: Important Safety Instructions
Typical Setup Configurations (U.S. Only)
Show - Elevation View
• Projector mounted from the ceiling.
• 9.8 ft (3 m) minimum vertical clearance from accessible floor to bottom plane of Hazard Zone.
• Hazard zone effectively isolated from human access with physical barriers and warning signage.
Note: Typical layout concept; not necessarily to scale.
Show - Elevation View - Typical Temporary Cinema Application
• Projector positioned at rear of venue.
• Front projection over audience onto projection surface.
• 8.2 ft (2.5 m) minimum lateral distance from accessible area to Hazard Zone.
• 9.8 ft (3 m) minimum vertical clearance from any accessible floor to bottom plane of Hazard Zone.