132
You see the Quick Corner adjustment screen:
Note: You can also access the Quick Corner setting by pressing the Menu button and selecting
Geometry Correction on the Settings menu.
4. Use the arrow buttons on the projector or remote control to select the corner of the image you want
to adjust. Then press Enter.
5. Press the arrow buttons to adjust the image shape as necessary.
Note: To reset your adjustments, press and hold the Esc button for at least 2 seconds to display a
reset screen. Then select Yes and press Enter.
6. When you are finished, press the Menu button.
Parent topic: Image Shape
Related references
Projector Feature Settings - Settings Menu
To Next Page
Loading...
