162
You see a screen like this:
5. Use the arrow buttons to adjust the value of the Gamma setting as follows:
• To brighten darker areas of the image, select higher gamma values. (Color saturation in the lighter
areas may become weaker.)
• To reduce overall image brightness and sharpen the image, select lower gamma values.
• If you are projecting using DICOM SIM as the Color Mode setting, adjust the gamma according to
the projection width. If it is less than 300 inches (7.62 m) wide, select a smaller value; if it is wider,
select a larger value.
6. To adjust specific tones in the gamma using a graph, select the Custom setting and press Enter.
You see a screen like this:
To Next Page
Loading...
