Epson Pro L30000UNL - Input Sources for Split Screen Projection; Using Advanced Image Adjustment Features

179
7. To change the image sizes, select the Screen Size setting, press Enter, select a sizing option,
press Enter, and press Menu to exit.
Note: Depending on the video input signals, the images may not appear at the same size even if you
choose the Equal setting.
8. To exit the split screen feature, select Exit Split Screen or press the Esc button.
Input Sources for Split Screen Projection
Parent topic: Adjusting Projector Features
Input Sources for Split Screen Projection
You can choose from the input source combinations listed here for split screen projection.
Note: Input signals exceeding WUXGA are not supported. If you see a 4K Enhancement message,
select Yes to disable the 4K Enhancement feature.
Left Screen Right Screen
HDMI HDBaseT DVI-D SDI Computer BNC LAN
HDMI —
HDBaseT —
DVI-D —
SDI — — — —
Computer — — — —
BNC — — — —
LAN — — — —
Parent topic: Projecting Two Images Simultaneously
Related references
Projector Parts - Interface Ports
Using Advanced Image Adjustment Features
Follow the instructions in these sections to use your projector's advanced image adjustments.