63
Related tasks
Adjusting the Image Position Using Lens Shift
Securing the Power Cord
You can provide additional support to the power cord by securing it with the power cord holder.
1. Plug in the power cord.
2. Flip the power cord holder over the power cord as shown.
Parent topic: Setting Up the Projector
Attaching and Removing the HDMI Cable Clip
You can install the HDMI cable clip that came with your projector to provide additional support to the
HDMI cable.
1. Plug in the HDMI cable.
2. Insert the end of the cable clip anchor into the cable clip slot near the HDMI port.
3. Place the open cable clip around the HDMI cable, but don't lock it into place.
4. Slide the cable clip onto the anchor and lock the clip onto the HDMI connector.
To Next Page
Loading...
