121
2. Press the Zoom button on the control panel.
3. Press the left or right arrow buttons to resize the image.
4. Press the Esc button when finished.
Note: You can also press the Zoom + or – buttons on the remote control to adjust the size of the image.
Parent topic: Using Basic Projector Features
Focusing the Image Using the Focus Buttons
You can adjust the sharpness of the projected image using the focus buttons.
Note: Wait 20 minutes after turning on the projector before setting the focus, zoom, and lens shift for
maximum accuracy. If you installed any of the following lenses, see the link below on focusing with a
short throw lens instead: ELPLR05 or ELPLU05.
1. Turn on the projector and display an image.
To Next Page
Loading...
